Welcome to Clay's Radio Shop
 Where Quality Counts! Email Subscribe
Support Via Phone, Chat, Email, Blog & Video   Sales  800-917-6698 Support 817-374-4675
Self Help? CB Radio Repair Now Offering Live Chat
From Our Skilled
Two-Way Radio Techs
testimonials for Clays Radio Shop
Check out our Blog & Videos
Our Blog Our Blog Video - Index

CB Antennas for Motorcycles

The FL Series provides reduced wind drag, is very flexible, and has a tunable mechanism for easy setting of the SWR
Firestik no ground CB antenna FL-3 - The "FL" Series antennas are the performance leader of lightweight top-loaded CB antennas. Each is approximately 40% lighter than the equivalent length Firestik II antenna. From the perspective of mount stress, the lighter materials and reduced wind drag of the "FL" antennas reduces stress by more than 60%. A 4-foot FireFly will easily perform on a mount that is designed for antennas 3-foot or less. At the top of every "FL" antenna you will find our patented tunable-tip. Besides making tuning a snap, the design broadens the antennas bandwidth and increases its power handling capabilities. Available in black or white colors.

Black  $19.95
White  $19.95


firestik no ground antenna systems FL-4 - All "FL" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced tube. Each is wound with double insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. The tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning. Our 3/8"-24 threaded base will fit all Firestik mounts and accessories. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. Available in black or white colors.

Black  $21.95
White  $21.95


The FS Series is an extremely ridged CB antenna and has a tunable mechanism for easy setting of the SWR
firestik no ground antenna systems

FS-2 - If you took the proven features and performance of the famous "KW" series antennas and added a unique tuning mechanism to the top, you would own the equivalent of a Firestik II, "FS" Series antenna. Aside from the ease of tuning, the patented design broadens the antennas bandwidth to keep SWR lower over more channels. The upper coil extension also increases the power handling capability of the antenna. All "FS" antennas are compatible with autos, trucks, vans, motorcycles and ATV's in a single antenna configuration when metallic ground plane is available. Or, they may be used in dual (co-phased) configuration on any vehicle made from any type of material. Available in black, white, red or blue colors.

Black  $23.95
White  $23.95
Red  $23.95
Blue  $23.95


firestik no ground antenna systems FS-3 - Like all CB antennas, the "FS" antennas should be fine-tuned (SWR) in their final mounting location. If you have ever tuned a non-tunable tip antenna, you will have a real appreciation for the "FS" antennas. To tune a "FS" antenna, you just pop-of the tip and turn the adjustment screw up or down as needed. All "FS" antennas exceed the requirements of any CB radio, new or old. Aside from the hi-performance loading coil that maximizes the transmit/receive functions of your CB, these top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features. Available in black, white, red or blue colors.

Black  $24.95
White  $24.95
Red  $24.95
Blue  $24.95


firestik no ground antenna systems

FS-4 - The "FS" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced shaft. Each is wound with heavy insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. The tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning. Our 3/8"-24 threaded base has a tapered contact point that works especially well with Firestik mounts and accessories. The tapered "lug-nut" effect transfers stress away from the threads and reduces the possibility of vibration induced loosening of the antenna in its mount. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. For peek performance we recommend that you use an 18-foot coaxial cable with these antennas. Available in black, white, red or blue colors.

Black  $25.95
White  $25.95
Red  $25.95
Blue  $25.95


Links to Related Products
Antenna Systems    Antenna Mounts    Antenna Mounting Kits    Coax Cable    Springs    Quick Disconnects    Connectors
 
     
 
Contact Us About US Servicing your Equipment Warranty Price Guarantee Payment Methods Shipping Cost CB Radio Repair
Site Map Privacy & security Payment acceptance Order fulfillment Order cancellations Exchange & Refund  
             
 
© 2003 - 2014  All rights reserved