Clays Radio Shop
  Site Map
Sales  800-917-6698 Support 817-374-4675
  Service your equipment testimonials for Clays Radio Shop

FL Series CB antennas

Firestik Antenna Company is located in Phoenix, Arizona, USA. Since its formation in 1962, the company's has remained focused on the personal communications market. Firestik has had a lot of experience there too. At various times in its life, Firestik manufactured CB radios, test meters, amplifiers, variable frequency oscillators, RF filters and more. In 1975 all energy was directed into designing a line of high performance antennas. A strong foundation was laid and a stable, quality minded company was built upon it. For the last twenty plus years Firestik kept focused on its mission. You will benefit from the dedication, care and spirit that Firestik puts into their products. CB antennas and related accessories is our product specialty. Honesty, fairness and understanding is our service specialty. What can we do for you?

Firestik primarily makes antennas and accessories for the mobile CB market. The company is especially recognized as a leader in the art of manufacturing high performance wire-wound CB antennas. Its success has earned it worldwide fame. Firestik products can be found throughout the United States. They are also sold in Canada, Mexico, United Kingdom, Western Europe, and several South American countries. Aside from specializing in CB antennas and accessories, Firestik's years of antenna know-how can be found in antennas made for scanners, two and ten meter amateur equipment, and specialty antennas such as those used for geoseismic exploration.

The Firestik name is synonymous with quality and performance. Having built and sold in excess of 5,000,000 (5 million) antennas should speak for itself. Those who are new to CB should seize the opportunity to start out with the best money can buy. As for you seasoned CB'ers, if you're not using a Firestik, you really don't know what you're missing. You might find a less expensive antenna, but we don't think you will ever find one better.

 

FL Series CB antennas

BRIEF: Lightweight, Easy-tune 'bare-hands tunable tip', High-performance coil design, Flexible fiberglass tube

DETAIL: The "FL" Series antennas are the performance leader of lightweight top-loaded CB antennas. Each is approximately 40% lighter than the equivalent length Firestik II antenna. From the perspective of mount stress, the lighter materials and reduced wind drag of the "FL" antennas reduces stress by more than 60%. A 4-foot FireFly will easily perform on a mount that is designed for antennas 3-foot or less. At the top of every "FL" antenna you will find our patented tunable-tip. Besides making tuning a snap, the design broadens the antennas bandwidth and increases its power handling capabilities. All "FL" antennas are compatible with autos, trucks, vans, motorcycles and ATV's in a single antenna configuration when metallic ground plane is available. Or, they may be used in dual (co-phased) configuration on any vehicle made from any type of material. Like all CB antennas, the "FL" antennas should be fine-tuned (SWR) in their final mounting location. If you have ever tuned a non-tunable tip antenna, you will have a real appreciation for the "FL" antennas. In short, tuning is as easy as popping off the tip and turning the adjustment screw up or down as needed. All "FL" antennas exceed the requirements of any CB radio, new or old. Aside from the hi-performance loading coil that maximizes the transmit/receive functions of your CB, these top-loaded antennas will also receive the NOAA emergency weather alert and national weather broadcasts for radios with those features.

All "FL" antennas are 100% American made with 100% American materials. To maintain a balance between flexibility and ruggedness, we use a custom blended, glass fiber reinforced tube. Each is wound with double insulated copper wire to prevent the oxidation and shorted windings often found on non-Firestik antennas. The tunable tip mechanism is made from rust-proof brass and has a rubber o-ring to hold the adjuster in place after tuning. Our 3/8"-24 threaded base will fit all Firestik mounts and accessories. Each antenna is covered with a static reducing, water-tight sleeve containing UV and pigment stabilizers. For peek performance we recommend that you use one of our Fire-Flex or Road Pal coaxial cables with these antennas.

All "FL" series antennas are factory bench tested for resonant frequency and overall quality. They are available in black, red or white with a black tip.

And don't forget ... ALL antennas, regardless of style or manufacturer, MUST be tuned after installation on the vehicle. Transmitting antennas are not "plug-n-play" devices.

5 Year Limited MFG Warranty

 
     
 
Contact Us About US Servicing your Equipment Warranty Payment Methods Shipping Cost CB Radio Repair
Site Map Privacy & security Payment acceptance Order fulfillment Order cancellations Exchange & Refund  
  Our Blog Video Index Testimonials Servicing
Your Equipment
  Social
Sharing

 
© 2003 - 2016  All rights reserved