Roger burp installed in the radio on an
existing switch
Roger Burp is a marker tone that triggers
when un keyed. It produces a very low pitch tone that
is approximately 1/2 second in length. It is installed
inside the radio and normally put on an existing switch
so that it may be turned off and on.
We recommend using the CH9, Brt/Dim, Tone,
or NB switch for the On/Off switch.
Placement instructions may be added to the
note section when placing the order.
Please indicate the desired switch to use
and how you would like the factory's function set. Please
indicate a 2nd choice switch in the event the first choice
switch can not be used.
For Example: Use the BRT/DIM switch. Set the lights to bright.
