Roger Burp is a marker tone that triggers when un keyed.
It produces a very low pitch tone that is approximately 1/2
second in length. It is installed inside the radio and normally
put on an existing switch so that it may be turned off and
on.
If a suitable switch is not available, a switch can be added
to the side or back of the radio.
Please indicate the preferred placement (right, left or back).
If the radio has a mic jack on the side, the side opposite
the mic jack is usually the preferred side due to space limitations
Placement instructions may be added to the note section when
placing the order.
CAUTION: keep in mind that if a switch is added to the side
or back of the radio a hole will have to be drilled. Drilling
a hole in the case may void the factory warranty. We recommend
using a front panel switch such as the ch9, Brt/Din, Tone,
etc in order to preserve the factory warranty. |
