Echo Board Installed
In The Radio
(The echo board is not a toy)
Echo Boards can be installed in most radios. The echo board
is not a toy. The echo increases the modulation with compression
and produces an echo and reverb effect. Adjusted properly
the echo can give the radio a deeper richer tone on transmit.
The echo board is installed inside the radio with a dual control
mounted in the place of an existing control. The dual control
is used to adjust the amount and the speed of the echo. The
control can often be put in place of an existing control on
most radios or can be put on the side or back of the radio
if a suitable control is not available.
We recommend installing the control in place
of the delta tune, dimmer control, or RF gain in the face
of the radio in order to preserve the manufactures warranty.
Please specify the desired placement of the control when placing
the order. Placement instructions may be added to the note
section when placing the order.
If the radio has a mike jack on the side, the side opposite
the mike jack is usually the preferred side due to space limitations
CAUTION: keep in mind that if the control is added to the
side or back of the radio a hole will have to be drilled.
Drilling a hole in the case may void the factory warranty.