coax is 95% shielded RG58X - 50 ohm for single
antenna applications or RG59A/U 75 Ohm for dual antenna applications.
The coax cables shielding is made with a copper braid.
It's insulation is made of poly foam for ultimate flexibility
and has solder on type PL259 connectors.
This coax cable is high quality coax.
Mini 8 (RG58) coax cable has very low loss characteristics
and is rated at 450 watts RMS. 50 ohm mini 8 (RG58) coax
is intended for a single antenna application only and
should never be combined for a dual antenna application.
Dual antenna systems require RG59 75 Ohm coax cable.
At 27 MHz the antenna system is in phase with 18 feet
of coax cable. We offer other lengths for use as a jumper
when adding an SWR meter for example. We highly recommend
using 18 feet of coax to the antenna for a mobile application.
50 and 100 foot lengths are intended for a base station
info on coax cable.
(Item #1 ) RG58X
- High Performance gray coax cable harness for a
single antenna system.
PL259 connectors (1) soldered on each end. Just
click the checkbox and click (add to your shopping cart)
coaxial cables have stranded center conductors, polyvinyl
insulation and bare copper shielding in the 95% range.
Recommended for coax runs close to a high heat source
such as the auto's exhaust system or a coax run that
puts pressure on the coax. polyvinyl is extremely tough.
Holds up better when pinched for example. Fire Ring illustration