|
|
Quality
scanner antennas and mounting kits
|
Everhardt Scanner
Antennas |
Tiger scanner
fiberglass antenna only - Black - 2 foot
(3/8 thread) (TIG MS1 BLK)
|
$9.95 |
|
|
| Tiger Scanner
Ant System with mirror mount & cable - Black - 2 foot
(TIG MS2 BLK) | $19.95 |
|
|
| Tiger Scanner
Ant System with mirror mount & Cable - White - 2 foot
(TIG MS2 WH) | $19.95 |
|
| Francis
Scanner fiberglass antenna - 5 1/2ft |
$19.95 |
|
Firestik Scanner Antennas |
 |
| Firestik
Mobile Scanner Antenna - 3 foot (black) | $18.95 |
|
|
| Firestik
Mobile Scanner Antenna - 3 foot (white) | $18.95 |
|
|
The MSB-RX antenna is for use as a home base scanner antenna.
The primary element is an efficient, wire-wound design with special
built-in traps for better performance in the action-packed 140-170
MHz band. However, the antenna can be used to receive scanner
signals between 25 and 1200 MHz. The primary element is 3 foot
(91cm) and white in color. The kit also includes a complete mounting
assembly, and three 24 inch (61cm) solid aluminum radials. This
base antenna assembles and mounts in a matter of minutes. It can
be mounted to a mast, a vertical or horizontal rail, or to the
side of any building or structure. The antenna termination is
a standard SO-239 so you may use any coax cable that is terminated
with a standard PL-259. Due to the various locations that users
install the antenna, we do not supply the coaxial feed line with
this kit. Nonetheless, the antenna requires RG-58 or equivalent
coax for the feed line from the antenna to the scanner. Firestik
offers a 50ft (15.2m) RG-58A/U coaxial cable that is terminated
on one end with a weather-tight PL-259 connector that will attach
to the MSB-RX antenna. The scanner end is not processed due to
the variety of possible connections used on scanners (RCA, BNC,
UHF, etc).
|
| Firestik
Base Scanner Antenna | $34.95 |
|
| Antenna mounting kits |
 |
Single,
Roof/Trunk Mount Mini-Kit
The mount in this mini-kit was exclusively designed right
here at Firestik to offer you a strong and stylish installation.
Unlike many of the similar style mounts on the market that use inferior
plastics and high resistance multi-part inserts, our mount has a
single chrome plated brass insert and is molded of 30% glass reinforced
nylon. It is the quality you deserve and have come to expect from
Firestik. The base diameter of the mount and the overall height is
only 2"
(51mm). With a simple 1/2" (13mm) hole, you can put this mount
on any flat horizontal surface. Because of the "very" low
profile, coax termination, this is the ideal set-up for roof mounts.
The underside space consumption is only 0.710" (18mm) so it
will work well under most headliners. We include a rubber gasket
to seal out water and a sturdy support washer too. (MKDM18R) |
|
|
|
Trunk
Mount System
The mount in this mini-kit is designed for trunk applications. The
mount bracket hooks over the rear lip of the trunk deck and is tightened
from underneath with two allen head screws. There are no mounting
holes! The bracket has two rubber feet on the bottom to give additional
support to the mount. (MK748R) |
|
|
|
Side
body mount
If you are looking for a side mount with some style, than this is
the set up for you. This kit includes the molded side mount and 18
ft (5.5m) of professional grade Fire-Flex coaxial cable. If adding
a spring with a base diameter larger than 0.700", a split lock
washer is required between the mount and the spring to ensure proper
seating of the spring to the mount surface. For use with antennas
up to 4 feet long. (MKM2) |
|
|
|
Workman
trunk mount kit
The mount in this mini-kit is designed much like the Firestik version.
The bracket hooks over the rear lip of the trunk deck and is tightened
from underneath with two allen head screws. There are no mounting
holes! The actual mount sits flush on the body. Includes 18 feet
of coax (WORK C-100) |
|
|
