Cobra 25 LTD
(Click on the image for larger
view)
(Scroll
down to purchase) Sold Out
Basics: 40
channel CB radio with
front panel mike connector, large digital channel indicator, illuminated RF
signal strength meter.
Controls: volume/squelch,
Dynamike Gain and RF Gain Switch
Functions: CB/ANL/PA,
instant channel 9, switchable noise blanker, dimmer Included Accessories:
Stock mike, mike hanger clip, mounting bracket, side mounting screws, power cord,
owners manual Dimensions:
W 6 1/4" x D 9" x T 2 1/4" Warranty: 3 months parts and labor warranty Condition:Refurbished
Our
Price Only $59.95Buy Now and Save
Professional
driver-requested improvements include a front panel microphone
connector (for convenient in-dash installation), a 9
foot microphone cord (for easy reach anywhere within
the cab), and tactile controls (for added convenience
and safety when adjusting functions).
Recommended
Modification#1 When Performance
Counts! This Service Comes With a 30 Day Money Back
Guarantee!
Our performance tune up increases the
radio's output by approximately 50%. The receiver gain
is typically 30-40% over stock specs. This modification
includes the following in order to enhance the
radio's performance. You will love it! Yes we really do align the receiver and adjust the frequency. Most stores can't or simply don't.
Turning up
the Transmitter's wattage
Adjusting the modulation for maximum output without distortion.
Modifying the mike amp circuit for more gain when necessary.
Aligning the receiver for optimum signal to noise ratio.
Adjusting the squelch range
Calibrate the transmit and
receive meter settings.
Frequency adjustment to zero tolerance.
Perform a complete check of all functions.
Perform a visual of the circuit board for
flaws.
Recommended
Modification #2 If You Are Serious
About Performance You Will Love This Modification! This Service Comes With a
30 Day Money
Back Guarantee!
This
modification increases a radio's output significantly.
With gain of approximately 100% more output wattage over
the performance tune up. It involves an in depth redesign
of the radio's transmitter strip including replacing the
transmit final with a larger more powerful transmit final.
In addition this modification includes all of the following:
Redesign the transmitter strip.
Replace standard transmit final with higher wattage transmit
final.
Adjusting the modulation for maximum output without distortion.
Modifying the mike amp circuit for more gain when necessary.
Aligning the receiver for optimum signal to noise ratio.
Adjusting the squelch range
Calibrate the transmit and receive meter settings.
Frequency adjustment to zero tolerance.
Perform a complete check of all functions.
Perform a visual of the circuit board for flaws.
Radio and modifications purchase section - Purchase Instructions
Notice:
Internal modifications of any type void
type acceptance granted by the FCC. If you intend to operate
a modified transceiver within the Continental United States
you may be in violation of Part 95 of the FCC rules and
regulations. We recommend reading and familiarizing yourself
with part 95 of the FCC rules and regulations before operating
a transceiver