Uniden 78 LTW
(Click on the image for a larger view)
(Scroll down to purchase)

Basics: 40 channel CB radio with backlit control knobs and 7 weather bands.
Controls: Volume, squelch, delta tune, RF gain, mic gain, and SWR calibrate
Switch functions: Instant channel 9, PA/CB, ANL/NB, brt/dim, meter functions - SRF/SWR/CAL, dynamic squelch control on/off and WX band selector
Included Accessories: Stock mike, mike hanger clip, mounting bracket, side mounting screws, power cord, and owners manual
Dimensions: W 7.5" x D 9.5" x T 2.25"
Warranty: 2 year MFG warranty
Condition: New Retail Box (NOT Refurbished)

Recommended Modification #1
When Performance Counts! This Service Comes With a 30 Day Money Back Guarantee!

The performance tune up increases the radio's output by approximately 50%. The receiver gain is typically 30-40% over stock specs. This modification includes the following changes in order to enhance the radio's performance.

Turning up the Transmitter's wattage
Adjusting the modulation for maximum output without distortion.
Modifying the mike amp circuit for more gain when necessary.
Aligning the receiver for optimum signal to noise ratio.
Adjusting the squelch range

Calibrate the transmit and receive meter settings.
Frequency adjustment to zero tolerance.
Perform a complete check of all functions.
Perform a visual of the circuit board for flaws.

Recommended Modification #2
If You Are Serious About Performance You Will Love This Modification!
This Service Comes With a 30 Day Money Back Guarantee!

This modification increases a radio's output significantly. With gain of approximately 100% more output wattage over the performance tune up. It involves an in depth redesign of the radio's transmitter strip including replacing the transmit final with a larger more powerful transmit final. In addition this modification includes all of the following:

Redesign the transmitter strip.
Replace standard transmit final with higher wattage transmit final.
Adjusting the modulation for maximum output without distortion.
Modifying the mike amp circuit for more gain when necessary.
Aligning the receiver for optimum signal to noise ratio.

Adjusting the squelch range
Calibrate the transmit and receive meter settings.
Frequency adjustment to zero tolerance.
Perform a complete check of all functions.
Perform a visual of the circuit board for flaws.

Notice: For Citizen Band Radios
Internal modifications of any type void type acceptance granted by the FCC. If you intend to operate a modified transceiver within the Continental United States you may be in violation of Part 95 of the FCC rules and regulations. We recommend reading and familiarizing yourself with part 95 of the FCC rules and regulations before operating a transceiver