Echo
installation: $69.95
installed
Echo
boards can be installed in most radios. The
echo board enhances and increases the radio's
modulation. It also produces an echo and reverb effect.
Used properly the echo can give a radio a deeper richer
tone on transmit. The echo board is installed inside
the radio with a dual control mounted in place of an
existing control or on the side to adjust the amount
of echo and the echo speed. The control can often be
put in place of an existing control on most radios or
can be put on the side or back of the radio if a suitable
control is not available. |
Roger
beep installation on a front panel switch: $34.95 installed
Roger
Beep is a high pitched marker tone that triggers when
the mike is un keyed. It's duration is about 1/2 a second.
It is normally put on an existing switch to be turned off
and on. |
Roger
beep installation on an added switch: $39.95 installed
Roger Beep is a high pitched marker tone that triggers when the mike is un keyed.
It's duration is about 1/2 a second. It is tied to a switch mounted on the side
or back of the radio to be turned off and on. |
Roger
burp installation on a front panel switch: $39.95 installed
Roger Burp is a low pitched marker tone that triggers when the mike is un keyed.
It's duration is about 1/2 a second. It is normally put on an existing switch
to be turned off and on. |
Roger
burp installation on an added switch: $44.95 installed
Roger Burp is a low pitched marker tone that triggers when the mike is un keyed.
It's duration is about 1/2 a second. It is tied to a switch mounted on the side
or back of the radio to be turned off and on. |
Noise
Toy PP1-(Internal module) $44.95 Installed
20 SECOND RECORD TIME (Internal module - single sound)
The
single noise toy is a 20 second record able module that
is installed into the radio; it is connected to an existing
switch so that it may be turned on and off. The noise
toy activates whenever the switch is toggled. Select
jokes, music, movie clips, TV bits, anything on cassette,
CD or computer wave file can be put on the record able
toy up to 20 seconds or select from our list of toys.
The module can have new sounds recorded
and replace the old with new.
Click this link to preview the noise toys:
Preview Toys |
| Noise
Toy PP2-(Internal module) $54.95 Installed
60 SECOND
RECORD TIME (Internal module - single sound)
The single
noise toy is a 60 second record able module that is installed
into the radio; it is connected to an existing switch so
that it may be turned on and off. The noise toy activates
whenever the switch is toggled. Select jokes, music, movie
clips, TV bits, anything on cassette, CD or computer wave
file can be put on the record able toy up to 60 seconds or
select from our list of toys. The module can have new sounds
recorded and replace the old with new.
Click
this link to preview the noise toys: Preview
Toys
|
Change
the recording of an installed Noise Toy (PP1 or PP2) $20 |