Ranger 6300 F150
150 watt output after performance tune up
(Click on the image for a larger view)
(Scroll down to purchase)

Basics: 10 meter AM/FM amateur transceiver, 12 bands of operation, frequency counter, echo, roger beep, talkback, +10KHz, adjustable RF power level from the front panel and SWR meter function.
Controls: Volume, squelch, mike gain, RF gain, talkback volume, RF power level, echo level and speed controls.
Switch functions: Channel and band selection, PA/FM/AM mode selection, echo on/off, NB/ANL on/off, SWR function, roger beep on/off, talkback on/off, brt/dim, and + 10KHz on/off
Dimensions: W 8" x L 10" x T 3"
Included Accessories: Stock mike, mike hanger clip, mounting bracket, side mounting screws, power cord, and owners manual
Condition: New Retail Box (NOT Refurbished)

Turning up the Transmitter's wattage.
Adjusting the modulation for maximum output without distortion
Modifying the mike amp circuit for more modulation if needed.
Aligning the receiver for optimum signal to noise ratio.
Adjusting the squelch range

Frequency adjustment to zero tolerance.
Frequency counter display calibration. (If applicable)
Calibrate the Transmit and Receive meter settings.
Perform a complete check of all functions.
Perform a visual of the circuit board for flaws.

RADIO LICENSE DISCLOSURE:
A license to operate certain two way radios may be required by your federal/local government. Operating certain radio equipment without such license may be illegal in your area. The end user consumer is solely responsible for acquiring such license and for the proper use of all radio equipment.
These radios are Amateur radios and not CB transceivers. Therefore, these radios are not governed by Part 95 of 47 C.F.R, but by Part 97 of 47 C.F.R. Part 97 does not require type acceptance of Amateur radios.