|
|
|
Integration
for the JMCB-2003 |
This component terminal will integrate the audio signals from
a cell phone, GPS and/or radar detector with the JMCB-2003 audio
system for the driver's (only) helmet headset.
If the cell phone normally rings out of its hands-free headset jack, or emits
any other beeps or tones, it will momentarily be heard in the left headset speaker.
A flip of the supplied control switch activates complete connection of the driver's
headset to the cell phone for complete hands-free operation.
If the radar detector or GPS unit emit any commands, beeps or tones, regardless
of what else might be being heard in the headset, they will momentarily be heard
in the right speaker.
This kit includes the plug-in integration module, handlebar-mounted control switch,
adapter cables for three-pin and four-pin cell phone headset jacks, and adapter
cables for most radar detector/GPS audio output jacks. Complete installation
and operating instructions are included.
Note: Additional cable adapters/accessories are available (at extra cost) for
a complete plug-and-play solution. (please back up to the previous page to purchase
these items)
J&M Part# CFRG-GRM2 is a direct plug-in adapter harness to connect the Garmin
2610 – 2820 GPS units.
J&M part# CFRG-PP85 is a direct plug-in adapter harness to connect the Passport
8500 radar detector.
J&M part# CFRG-BT01 is a Bluetooth adapter module for wireless connection
of Bluetooth enabled cell phones and GPS/Navigation devices. |
|
| Don't see what you are looking for on this web site? Check out our new web site which caters specifically to the motorcycle rider. We think you will be pleased with the great selection and competitive pricing. Just click the link www.motorcycle-communications.com |
| What
do I need for a complete J&M system? |
| You
will need a radio, either the (JMCB-2003-SL) kit
for solo (Driver Only) or the (JMCB-2003-DU) kit
for driver/passenger headset operation. You will also need a radio mounting bracket, headset, lower cord section and an antenna
system. If you have a radar detector with an audio output jack,
voice activated cell phone or a GPS with an audio output jack
you can integrate these items and listen to them through the
drivers headset with the audio integration kit model number (
JCB03-CFRG).
The JMCB-2003 radio is designed to integrate one audio source
or device without the need for the JCB03-CFRG audio integration
kit. The kit is only required when integrating more than one
audio device. |
| Quick Links to Related Product |
We
now offer two motorcycle communications systems - JM
Integratr IV and the JM CB
* Helmet
headsets * Replacement lower cord sections * Antenna
systems * Mounting
brackets * Speaker
systems *
*
Goldwing audio product GL1800 **
Police radar detection for
motorcycles * |
|
| Haven't found what your looking for! Check out these great web sites |
Motorcycle Communications
For all your communications needs
Bike to bike, intercoms, police radar detection, bike GPS systems and more! |
|
J&M Motorcycle radios
Insane prices and an excellent selection of J&M radios, helmet headsets and much much more. |
|
Motorcycle Parts
Motobrio specialize in motorcycle parts and clothing, including helmets, leathers and gloves. Perfect for your motorcycling needs. |
|
|
|
|
J&M
motorcycle products satisfaction guarantee: If you
are not satisfied with the quality and sound of your J&M
brand helmet headset, we will buy it back. We give you
15 days from the date of purchase to hook the headset up and check
it out. If you are not completely satisfied with any J&M helmet
headset purchased from Clays Radio Shop, we will take it back within 15 days from the date of the original purchase. J&M offers a 2 year warranty against defects in materials and workmanship. The provisions of this guarantee shall not apply to any unit which has been subjected to misuse, neglect, incorrect mechanical or electrical installation, unauthorized modifications, accidents, nor to units which have been repaired or altered. If returned the
product must be in its original condition, including the
box, UPC bar code, packaging, and all accessories. Freight
is non refundable. The
customer is responsible for freight back to our facility. Please
call for an RA number before shipping an item to our facility.
The RA number must be printed on the outside of the box.
A package returned without an RA number will be refused.
No C.O.D's please. We do not accept C.O.D's.
Price Guarantee: If you find the J&M system you have purchased at a lower
price, we will refund the difference. We give you 30
days after the sale to shop around. If you find a verifiable
delivered price on a new J&M system lower than our price,
we will refund the difference. |
|
